Handlebar Grips/Tape

Our best-selling Super Sticky Kush tuned and tailored to the specific needs of gravel. Plush 3.2mm of thickness for extra shock absorption and control. Each roll is extra long to give you the freedom to wrap any way you want. - Tackiest/Best Hand Feel - Long Lasting PU Tape - Laser Etched Aluminum Bar Plugs - High-End Rubberized Finishing Tape - Material: PU Length: 2200mm Width: 30mm Thickness: 3.2mm

If you have issues with numbness and fatigue when using regular grips, check out Sunlite's Ergo Ridge Grips. They feature an oversize, supportive palm area with an anatomic design for the ultimate in comfort. The dual-compound design features soft, non-slip rubber on the main grip for padding, while the inner core is a harder rubber for a secure hold on your bars.

The Jake Seeley signature grips feature a gradually increasing rib width design and a tapered core for comfort. - 160mm

Our Enduro Grips are designed to outperform the rigors of all mountain and enduro riding. That's why they feature a thicker degree of padding and a non-slip texture for enhanced shock absorption and lasting comfort. Not stopping there, we amplified these characteristics via a dual-density compound. As we mentioned, the inner core is thicker than your average grip in order to deal with shock, while the outer part has a softer density to better absorb vibrations. And to put the "grip" into these grips, we also gave them a textured pattern for no-slip performance on the trail. Put it all together, and you're looking at grips that are going to leave your hands comfortable and fresh over your whole ride. - Softer density on the outside for superior vibration damping. - Dual-density compound for improved comfort and bar adherence. - Softer, thicker padding for heightened comfort. - Higher-density inner core for secure bar attachment. - Textured pattern provides non-slip performance. - Diameter: 30mm

If the local dirt jumps are you happy place, you're going to want the Specialized P.Grip Dirt. Their textured pattern provides a no-slip grip and the large inner flanges keep your hands in place. The locking clamp keeps the grips in place

When you look at the start line of a race that's bound for rough roads, you're sure to see bar upon bar wrapped in cork tape. Why? Because it's tough to beat the vibration absorbing properties of this natural material. With the Specialized S-Wrap Cork Handlebar Tape, however, we managed to do one better. It features a dual-density design that pairs cork with EVA foam tape, and the result of this is an incredible reduction in hand fatigue. They also gave it an elastomer gel backing to heighten the aforementioned, as well as overall comfort. And for easy installation, they kept everything highly stretchable and low in profile. - Low-profile cork/EVA foam tape is sleek and comforting over rough roads. - Elastomer gel backing provides additional comfort and vibration damping. - Easy-stretch tape with feathered edges creates a smoot, low profile wrap. - Bar end plugs included.

Cross country racing is demanding, requiring ultimate concentration plus confidence in every little part of your race rig. Specialized XC Race Grips are super light and provide an excellent bar feel that's more than just comfortable. Their low profile and great hand-to-bar contact delivers a feeling of confident control and superior handling over the most technical race courses. - Low profile design provides more direct feel and improved bar control. - Silicone/foam material provides optimal comfort and grip. Available in regular and XL sizes. - The grip's tacky texture provides added bar control. - Diameter: 30mm - Weight: 38g

Cross country racing is demanding, requiring ultimate concentration plus confidence in every little part of your race rig. XC Race XL Grips are super light and provide an excellent bar feel that's more than just comfortable. Their low profile and great hand-to-bar contact delivers a feeling of confident control and superior handling over the most technical race courses. - Low profile design provides more direct feel and improved bar control. - Silicone/foam material provides optimal comfort and grip. Available in regular and XL sizes. - The grip's tacky texture provides added bar control. - Diameter: 32mm - Weight: 40g

Specialized's S-Wrap Roubaix Handlebar Tape boasts a stylish suede finish and elastomer gel cushioning for awesome vibration damping and comfort.

Bling collection delivers the flashiest bar tapes for the flashiest of riders. Fusing performance and style, Supacaz delivers the only bar tape worth dreaming about. Signature Supacaz Oil Slick gives that perfect touch. Bling bling every time you ride around your city! - Bling PU (top layer): We’ve utilized exclusive materials to produce the most insane looking bar tape ever. Super flashy and extremely durable. - Kush Foam (middle layer): Exclusive compound that maximizes dampening via a nano amount of foam. Shock-absorbing qualities that drastically improve bike handling in the corners, downhill, and in rough conditions. - Emboss: The tape is completed with the embossment of the beloved Supacaz pattern. The embossment creates the unique Supacaz look and wicks away moisture which maximizes grip. - Star Plugz: Aluminum Bar Plugs, Screw & Expand (3mm), Anodized, Laser Etched logo - Finish Tape: High-End Rubberized Tape (Multi-Use), Supacaz Pattern Frost Print

- A totally new grip designed from the ground up to give you more control and comfort then ever before! - Single lock ring design and smooth thumb zone. - Reinforced bar end area - Anatomical bar end design supports and protects the little finger - Cut outs improve impulse shock, vibration absorption and comfort - Interlocking columns support low profile fins to create a tread pattern which offers the benefits of both a finned grip and a low profile - Features: Single lock grip, low profile 30mm diameter, tapered bar ends, Spank 'Human Factor' grip pattern. - Material: Rubber, alloy clamp, plastic base, steel bolt - Length (mm): 145 - Diameter (mm): 30 - Weight (g): ±115g / Pair

- A totally new grip designed from the ground up to give you more control and comfort then ever before! - Single lock ring design and smooth thumb zone. - Reinforced bar end area - Anatomical bar end design supports and protects the little finger - Cut outs improve impulse shock, vibration absorption and comfort - Interlocking columns support low profile fins to create a tread pattern which offers the benefits of both a finned grip and a low profile - Features: Single lock grip, low profile 30mm diameter, tapered bar ends, Spank 'Human Factor' grip pattern. - Material: Rubber, alloy clamp, plastic base, steel bolt - Length (mm): 145 - Diameter (mm): 33 - Weight (g): ±115g / Pair

The most advanced foam ever used in bar tape along with an extremely long wearing and tacky top layer, this is the ultimate in comfort. - 2.5mm of cushion similar dampening to 3.5mm in other tapes. - Laser engraved aluminum end plug. - Fully adhesive finishing tape. - Butterfly clamp cover that doesn't add bulk. - SILCA Crash Replacement Program

The most advanced foam ever used in bar tape along with an extremely long wearing and tacky top layer, this is the ultimate in comfort. - Tour Magazine Test Winner. - 3.75mm of cushion similar dampening to 5mm in other tapes. - Laser engraved aluminum end plug. - Fully adhesive finishing tape. - Butterfly clamp cover that doesn't add bulk. - SILCA Crash Replacement Program

Silca Nastro Piloti is a 1.85mm-thick tape for aggressive riding and racing which provides cushioning equivalent to 2.5mm thick tapes of existing technology. The Asymmetric Piloti Texture inspired by F1 tire technology allows the tape to be wrapped in either a moderate-texture or high-texture format depending on preference. Inspired by advancements in running shoe foam and F1 tires as well as our own research into rolling efficiency, impedance, and damping, we realized that materials technology could allow for a significant improvement in bar tape. Using a laminate of SILCAthane, SILCAlon and 3M Visco-elastic adhesive instead of a single-foam extrusion, the tape can be optimized across a range of desired features. The resulting tape has a softer, more comfortable feel, higher wet and dry grip, better vibration isolation, and 3-5x the durability of existing tape materials. Since the actual wrap of the tape can be as important as the tape itself, we've also developed a full adhesive backed 'butterfly' to better cover the back of the lever clamp area without adding bulk, a high-grip finishing tape, and expanding aluminum/composite end plugs to ensure every detail is perfect. - Ultra Performance 1.85mm thick Tri-Laminate design delivers equivalent cushioning to 2.5mm tapes - Racecar inspired Dual-Tread deboss allows the tape to be wrapped for High Grip or Max Grip depending on wrap direction - Aluminum expanding bar-end plug - PU finishing tape - Butterfly shaped brake clamp cover

Salsa's Backcountry Grips are constructed of sticky, durable, supple rubber and are sized for comfortable use with or without gloves. - ADV BY BIKE text blocks sized for comfort with or without gloves - 143mm overall length

- Grip tapers up towards the lock-ring for comfort and security - Single-sided lock-on collar - 134mm overall length including the locking collar - Only Compatible with Salsa Lock-on Collars - Grip only, no lock rings. - For replacement use

- Closed-end design protects end of handlebar while looking good - Compatible with Salsa Backcountry Grips only - 30g for pair

Wrap your handlebars in comfort, luxury and style with Salsa's Gel Cork Tape. It's made from cork with a vibration-damping gel backing and is embossed with the Salsa logo. And, with a variety of palette-pleasing colors to choose from, you're sure to find your favorite one!

The Glyph Gel Cork Tape will add class to your rig, and feel good mile after mile. - Long wearing - Extra length for wider bars - Anti-slip gel backing - Patterned with symbols of the good life

SRAM's Handlebar End Plugs are just the thing for adding a fun, custom touch to your handlebar taping job. They feature SRAM's famous and stylish "Make the Leap" frog logo.

SRAM's Handlebar End Plugs are just the thing for adding a fun, custom touch to your handlebar taping job. They feature SRAM's famous and stylish S logo.

SRAM Racing Grips offer a great grip for total control and come in several sizes to fit your front-end setup. These durable rubber grips have stylish logos stamped in them and are built to last and not slip.

SRAM's SuperCork Bar Tape looks good and feels great. This light, stretchy tape is easily installed and adds a touch of class to any bike.

Twist shifter grip including lockring XX1/X01/Non-series Eagle.

SRAM's Locking Foam Contour Grips offer the soft feel of foam with the easy installation and security of a lock-on grip.

SRAM's Locking Foam Grips offer the soft feel of foam with the easy installation and security of a lock-on grip.

Keep your bike looking good with SRAM's DoubleTap Lever Hoods matching your frame. They're made of a soft, grippy rubber and will enhance any bike's appearance.

• Replacement locking handlebar grip sets for X0 and XX Grip Shift • Available in 100mm and short length 85mm shifter with interlocking Grip Shift interface and single bolt clamp. • Available in full-length 122mm grips with dual locking bolt clamps. • Available in black and silver.

• Replacement locking handlebar grip sets for XX1 Grip Shift • includes one 100mm right and one 122mm left grip • Available in black or silver.