Parts & Accessories
The Iconic SILCA 24.1 gasket is the heart of the press-on Presta chuck. The current 242 gasket utilizes a high tech and very red, fully synthetic elastomer base material.
Replacement gasket for reversible brass chucks, modern Impero Frame Pumps, and Pocket Impero
Years ago while Josh was working with the Team CSC at the Dauphine Libere, he noticed one of their mechanics using the most amazing little chuck to manage the disc wheel inflation. Unlike anything he had seen before, it was all metal and used a 'lollipop' lever on the side to lock onto the valve stems in disc wheels. The mechanic explained that these were made in Japan and were coveted by all the Euro-Pro mechanics due to their scarcity. So Josh set out to improve the design and make it available to cyclists everywhere. - Full metal construction, guaranteed for 25 years and covered by SILCAShield - Can effectively seal on valve stems as short as 10mm! - Uses SILCA 254 High-Tech Elastomer gasket - Adjustable gasket pre-load allows for a custom fit on any valve as well as compensation for gasket wear - Male Schrader thread fits into any Schrader chuck, or use SILCA Thread-On Schrader Adapter to fit a bare hose - Bullet-proof high-pressure, disc-compatible chuck for high-pressure situations.
If you have a SILCA PISTA made since 1946, a SUPERPISTA since 1989, or any of the Impero Frame Pumps since 2015, it has a check valve assembly like this to ensure that air can only go in one direction
n partnership with the rubber and tire experts at Continental , we are offering a custom extruded 3/16" ID air hose compatible with all historic PISTA Handles.
The most accurate analog gauge ever put on a floor pump. Wear is real so replace your gauge every 5 years to keep it like new! - 0-160psi - 1% accuracy - 1psi resolution
Will Ship within a week. When tire pressure matters, the Truth is your answer. Accurate to 0.2% and compensating for temperature, humidity, and elevation this is anything but just another gauge. - 100% Made in USA - 0.2% accurate between 0-60 psi - .5% at 100psi - 1% at 200psi - 3D Printed titanium body - Aluminum bleed valve - .1psi per minute bleed capability - 9v battery - 1,200 hour battery life - Temperature range 0 to 120F
Page 1 of 1